Plastic & Rubber Ingredients
-
Tall oil rosin
Appearance and properties: transparent glassy brittle substance, light yellow to brown, with a special odor.
Main ingredients: Resin acid
Content: 85-92%
CAS No.: 8050-09-7
Molecular formula: C19H29COOH
Relative molecular weight: 262.4302The properties and uses of tall oil rosin are similar to grease rosin, rubber, papermaking, paints and coatings, inks, fluxes, soaps, adhesives, batik and polymers.
-
furfural-acetone (polycondensate) resin
At different room temperatures, the viscosity changes small, easy to measure volume, easy to mix sand. Free formaldehyde is low, and improving working conditions is conducive to environmental protection. The low nitrogen content of cast iron resin can reduce the porosity defects of castings and improve the yield of castings. Resin for steel casting, with little or no nitrogen, can reduce the porosity of castings. Sand mold (core) has high strength at room temperature and good strength at high temperature.
-
97.5% Butyl stearate CAS 123-95-5
Chemical name: Butyl stearate
Other name: Stearic acid butyl ester, Octadecanoic acid butyl ester
CAS #: 123-95-5
Purity: 97.5% min
Molecular formula: CH3(CH2)16COO(CH2)3CH3
Molecular weight: 340.58
Chemical Properties: Colorless or light yellow oily liquid, soluble in acetone, chloroform, soluble in ethanol, insoluble in water.
Application: Butyl stearate is PVC cold resistant additive, widely used in PVC transparent flexible board, cable material, artificial leather and calendring film manufacturing. -
Plasticizer DINP 99% Diisononyl phthalate (DINP) CAS 28553-12-0
Chemical name: Diisononyl phthalate
Other name: DINP
CAS #: 28553-12-0
Purity: 99% min
Molecular formula: C26H42O4
Molecular weight: 418.61
Chemical Properties: Colorless transparent oily liquid with slight odor, Insoluble in water, soluble in aliphatic and aromatic hydrocarbons. Volatility is lower than DOP. Has good heat resistance.
Application: DINP is a general-purpose primary plasticizer with excellent performance. This product has good compatibility with PVC, and will not precipitate even if it is used in large quantities; its volatility, migration and non-toxicity are better than DOP, and it can endow the product with good light resistance, heat resistance, aging resistance and electrical insulation properties, and its comprehensive performance is better than that of DOP. DOP. Because the products produced by this product have good water resistance and extraction resistance, low toxicity, aging resistance and excellent electrical insulation properties, they are widely used in toy films, wires and cables. -
Plasticizer DOTP 99.5% Dioctyl terephthalate (DOTP) CAS 6422-86-2
Chemical name: Dioctyl terephthalate
Other name: DOTP, Bis(2-ethylhexyl)terephthalat
CAS #: 6422-86-2
Purity: 99.5% min
Molecular formula: C24H38O4
Molecular weight: 390.56
Chemical Properties: Colorless or slightly yellowish oily liquid. Almost insoluble in water, solubility of 0.4% in water at 20℃. Soluble in common organic solvents
Application: Dioctyl terephthalate (DOTP) is an excellent primary plasticizer for polyvinyl chloride (PVC) plastics. Compared with the commonly used diisooctyl phthalate (DOP), it has the advantages of heat resistance, cold resistance, non-volatile, anti-extraction, softness and electrical insulation properties, and shows excellent durability in products, Soapy water resistance and low temperature softness. -
Plasticizer DOS 99.5% Dioctyl sebacate (DOS) CAS 122-62-3
Chemical name: Dioctyl sebacate
Other name: DOS, Bis(2-ethylhexyl) sebacate
CAS #: 122-62-3
Purity: 99.5% min
Molecular formula: C26H50O4
Molecular weight: 426.67
Chemical Properties: Colorless to light yellow liquid. Insoluble in water, soluble in ethanol, ether, benzene and other organic solvents. It can be mixed with ethyl cellulose, polystyrene, polyethylene, polyvinyl chloride, vinyl chloride – vinyl acetate copolymer, etc. Good cold resistance.
Application: DOS is an excellent cold-resistant plasticizer for polyvinyl chloride with high plasticizing efficiency and low volatility. Therefore, in addition to excellent low-temperature and cold-resistant properties, it has good heat resistance and can be used at higher temperatures. . This product has good weather resistance and excellent electrical insulation performance. It is often used in combination with phthalates. It is especially suitable for cold-resistant wire and cable materials, artificial leather, films, plates, sheets and other products. This product is non-toxic and can be used for food packaging materials. In addition to polyvinyl chloride products, it can also be used as a low-temperature plasticizer for various synthetic rubbers, as well as for resins such as nitrocellulose, ethyl cellulose, polymethyl methacrylate, polystyrene, and vinyl chloride copolymers. Cold-resistant plasticizer. Used as a lubricant for jet engines. -
Plasticizer DBP 99.5% Dibutyl phthalate (DBP) CAS 84-74-2
Chemical name: Dibutyl phthalate
Other name: DBP
CAS #: 84-74-2
Purity: 99.5% min
Molecular formula: C6H4(COOC4H9)2
Molecular weight: 278.35
Chemical Properties: Colorless transparent oily liquid, slightly aromatic odor.Soluble in common organic solvents and hydrocarbons.
Application: DBP is used as plasticizer for polyvinyl acetate, alkyd resin, nitrocellulose, ethyl cellulose and neoprene and nitrile rubber, etc. -
Plasticizer 3G8 98.5% Triethylene glycol bis(2-ethylhexanoate) / 3G8 CAS 94-28-0
Chemical name: Triethylene glycol bis(2-ethylhexanoate)
Other name: 3GO, 3G8, 3GEH, Triethylene Glycol Di-2-ethylhexoate
CAS #: 94-28-0
Purity: 98%
Molecular formula: C22H42O6
Molecular weight: 402.57
Chemical Properties: Colorless transparent liquid, Insoluble in water.
Application: 3G8 is a solvent-based cold-resistant plasticizer with excellent low temperature, durability, oil resistance, ultraviolet radiation resistance and antistatic properties, as well as low viscosity and certain lubricity. Compatible with many natural resins and synthetic rubbers, soluble in many organic solvents, but insoluble in mineral oil. Thixotropic in plastisol, ideal for special purpose applications. -
Plasticizer TBC 99.5% Tributyl Citrate (TBC) CAS77-94-1
Chemical name: Tributyl citrate
Other name: TBC
CAS #: 77-94-1
Purity: 99.5% min
Molecular formula: C18H32O7
Molecular weight: 360.44
Chemical Properties: Colorless oily liquid, slightly odorous.Insoluble in water, soluble in methanol, acetone, carbon tetrachloride, glacial acetic acid, castor oil, mineral oil and other organic solvents.
Application: TBC is a non-toxic plasticizer, which can be used for non-toxic PVC granulation, food packaging materials, soft toys for children, medical products, plasticizers for polyvinyl chloride, vinyl chloride copolymers, and cellulose resins. -
Plasticizer ATBC 99% Acetyl Tributyl Citrate (ATBC) CAS 77-90-7
Chemical name: Acetyl tributyl citrate
Other name: ATBC, Tributyl 2-acetylcitrate
CAS #: 77-90-7
Purity: 99% min
Molecular formula: C20H34O8
Molecular weight: 402.48
Chemical Properties: Colorless, odorless oily liquid. Insoluble in water, soluble in most organic solvents. Compatible with a variety of cellulose, vinyl resins, chlorinated rubber, etc. Partially compatible with cellulose acetate and butyl acetate.
Application: Used as plasticizer for toys, nipple, fitness ball and plastic hand shank etc…
Packing: 1L/Bottle, 5L/25L/Drum , 200KG/DRUM, 1000KG/IBC -
Industrial grade Plastic Additive Calcium Stearate CAS 1592-23-0
Chemical name: Calcium Stearate
Other name: Stearic acid calcium salt, Octadecanoic acid calcium salt
CAS No.: 1592-23-0
Assay (Ca): 6.5±0.6%
Molecular Formula: [CH3(CH2)16COO]2Ca
Molecular Weight: 607.02
Chemical Properties: Calcium stearate is a fine white, fluffy powder with an oily feel, soluble in toluene, ethanol and other organic solvents. It is non-toxic and slowly decomposes into stearic acid and corresponding calcium salts when heated to 400°C.
Application: Used as non-toxic stabilizer, lubricant, mold release agent and textile waterproofing agent for PVC plastics, etc. -
Industrial Grade Plastic Additive Magnesium Stearate CAS 557-04-0
Chemical name: Magnesium Stearate
Other name: Stearic acid magnesium salt
CAS No.: 557-04-0
Assay (MgO): 6.8~8.3%
Molecular Formula: [CH3(CH2)16CO2]2Mg
Molecular Weight: 591.24
Chemical Properties: Magnesium stearate is a small, light white powder with a smooth feel, insoluble in water, ethanol and ether, soluble in hot water and hot ethanol, and decomposed into stearic acid and the corresponding magnesium salt in the presence of acid.
Application: Used as heat stabilizer for polyvinyl chloride, lubricant for ABS, amino resin, phenolic resin and urea resin, paint additive, etc. -
Industrial grade Stearic Acid CAS 57-11-4
Chemical name: Stearic Acid
Other name: Octadecanoic acid, Stearophanic acid, 1-Heptadecanecarboxylic acid, C18, Cetylacetic acid
CAS No.: 57-11-4
Assay (C18): 38.0-42.0%
Molecular Formula: CH3(CH2)16COOH
Molecular Weight: 284.48
Chemical Properties: Stearic acid is a white or off-white powder or crystalline hard lump with a slippery feel, and its cross section has fine needle-like crystals with a slight gloss; it has a slight odor similar to oil and is tasteless. Soluble in alcohol, ether, chloroform and other solvents, insoluble in water.
Application: Widely used as plastic cold-resistant plasticizer, stabilizer, surfactant, mold release agent, rubber vulcanization accelerator, etc. -
99% Dicumyl peroxide (DCP) CAS 80-43-3
Chemical name: Dicumyl peroxide
Other name: DCP, Bis(1-methyl-1-phenylethyl) peroxide, Bis(α,α-dimethylbenzyl) peroxide
CAS No.: 80-43-3
Purity: 99%
Molecular Formula: [C6H5C(CH3)2]2O2
Molecular Weight: 270.37
Chemical Properties: DCP is a white crystalline powder, stable at room temperature, gradually turns yellowish when exposed to light, insoluble in water, soluble in benzene, cumene, ether, petroleum ether, slightly soluble in ethanol, is a strong oxidant, can be used as a mono Initiator of bulk polymerization, vulcanizing agent, crosslinking agent, curing agent, flame retardant additive of polymer materials, etc.
Application: It can be used as an initiator for monomer polymerization, a vulcanizing agent, a crosslinking agent, a curing agent, and a flame retardant additive for polymer materials. -
99% Hexamethylenetetramine / Hexamine CAS 100-97-0
Chemical name: Hexamethylenetetramine
Other name: Hexamine
CAS No.: 100-97-0
Purity: 99%
Molecular Formula: C6H12N4
Molecular Weight: 140.19
Chemical Properties: Hexaminel is white crystalline powders, Soluble in water, ethanol, chloroform, carbon tetrachloride, insoluble in ether, petroleum ether, aromatic hydrocarbon. Application: Used as curing agent for resins and plastics, catalyst and foaming agent for amino plastics, accelerator for vulcanization of rubber (accelerator H), shrink inhibitor for textiles, etc.